Installing the XPV6 USB Interface

Installing the Device Driver for the XPV6

1.        Click here to install the device driver.

2.        The following Windows warning (or similar depending on Windows version) will be displayed:


3.        Click Run and the following screen will be displayed:

4.        There will be a delay of up to 60 seconds and then the following screen will be displayed if the installation has been successful:

5. Plug the USB cable from the XPV6 into a spare USB port on your computer. For the XPV6 interface model a serial communications (COM) port is assigned to the unit and must now be determined. Instructions on how to do this are available by clicking here. ALTERNATIVELY, run the BMS software and try different COM port settings from the Options window until a connection is established.