The "Intelligent
Director"
Testing and Training Change
of Direction and Cutting
Speed using the
Kinematic Measurement System
Features:
- KMS randomly displays a directional arrow
- athlete changes direction as indicated and sprints and to the indicated
target
- system measures time to reach target
- number of reps can be preset
- delay between passing start switch and presentation can be set between 0
and 20 seconds
- both testing and training applications
- determine if athlete is slower cutting to a given direction
How to run a test:
- Setup the test conditions by selecting "Options" from the KMS
"View" menu

- The following "Options" window will be displayed.
Select the "Intelligent Director" tab.

- Set the delay before direction is displayed in milliseconds. This is
the time period after the athlete crosses the start gate before the
direction arrow is displayed. The longer this period, the later it is
before the arrow is displayed and the less time the athlete has to react and
change direction.
- Select the directions to be displayed. All four can be used, just
left or right, just left, etc.. In fact any combination so long as at
least one direction is selected. The direction for each trial will be
randomly selected from those selected.
- Set the number of trials, from the General options tab.
- Lay out light gates and/or contact mats in appropriate
configuration. Distances between gates and configuration depends on
the aspects of reaction time and speed you aim to assess. An example
layout for testing left and right cutting speed is displayed below.

- You are now ready to begin the test.
- Select the "Intelligent Director" option from the KMS
"Tests" menu

- The following "Intelligent Director" test window will appear

- When the athlete is ready to begin click the start button. The following
message will be displayed:
Start When Ready!
- In his/her own time the athlete begins the trial by running through the
start gate. An arrow indicating the direction the athlete should
run will be displayed on the computer screen.
- The athlete changes direction and sprints to the target.
- The time for the trial just completed is displayed and the athlete is
instructed to start the next trial when ready.
- After the designated number of trials have been completed the following
summary data is displayed.

- Clicking "Save Trial" will save the results the document with
the following information
Intelligent Director Test
Date: Tuesday, April 24, 2001 Time: 09:58 AM
Subject: John Smith Mass: 78 kg
| Trial No. |
Time (s) |
Direction |
| 1 |
1.867 |
Left |
| 2 |
1.519 |
Right |
| 3 |
1.721 |
Right |
| 4 |
1.940 |
Left |
| 5 |
1.644 |
Right |
| 6 |
1.548 |
Right |
SUMMARY
| average time |
1.707 |
| best time |
1.519 |
| left:right ratio |
1.18 |
Return to Kinematic Measurement System Page
Copyright Innervations 2000-2008. All rights reserved.
Last updated
Saturday, September 20, 2008